3 Simple Tips For Maintaining A Window Air Conditioner

It has been demonstrated through numerous studies that filters that are not cleaned or left neglected can cause more or less severe illnesses such as a sore throat, bronchitis, abdominal pain, colds, lumbago, bacterial infections and other diseases affecting the respiratory system.

The maintenance of the air conditioner is an operation as important as necessary to improve its energy efficiency and to avoid the risk of filling our rooms with unhealthy air.

Here the cleaning of the air conditioning filter becomes indispensable as it avoids the onset of pathologies and problems to the plant itself. Themain task of Intec air conditioner is to purify and refresh the air in the house in which it is installed, as well as being able to filter dust and bacteria present in it.

The primary cleaning of air conditioners should be done at the end of the season, around September / October, to prevent dust and dirt from getting encrusted in the appliance during the winter season. And to extend his life, it would be good to protect him, in the winter months, with a suitable cover.

In any case, during the summer use, it is necessary to perform some main operations:

  • Cleaning of the outdoor unit and, if possible, of the internal one, constantly subjected to dust and pollutants (on this occasion we also check the stability of the engine support);
  • Cleaning the filters, where germs and bacteria are easily lurking;
  • Verification of possible refrigerant gas leaks and condenser control.

Do you need a technician for these operations? To clean the engine and the filters, it is not necessary to contact a technician, but we can do it ourselves.

The cleaning of the units

However, if we do not have the time or opportunity to do so, we will contact a window air conditioner brands in India that installs air conditioners that will ask about 40 euros (VAT excluded) for the internal and external cleaning of the appliance, plus the cost of specific products used.

If, on the other hand, we clean the engine, make sure that the appliance is switched off, and proceed to remove the protection grid.

With a simple brush, we can remove the dust accumulated on the blades, which we will then wash with a wet cloth and a universal degreaser.

If we notice that there are some obstacles, even just the dry leaves that can obstruct the engine, we use the vacuum cleaner to remove it: we will allow the correct operation of the appliance over time and will avoid producing annoying noises.

If the motor is housed in a hard-to-reach place, cleaning will require the use of the compressor and a ladder or scaffolding, and it would be better, in this case, to call a technician who will carry out the work in safety.

Leave a Reply

Your email address will not be published. Required fields are marked *

WordPress spam blocked by CleanTalk.