Author: Intec Group

What Is The Indicated Height To Install The Television?

Intec Group 1 Comment

How many televisions are in your home? Nowadays it is common to have more than one, being mostly of the flat screen, LCD, LED or Smart-TV. Now, how are they positioned? This is a question that you may not have asked yourself, but its relevance may surprise you.

Adjusting the screen to a correct location can improve your experience as a viewer. At the same time, it will help you prevent health complications, derived from a bad position. If you desire to know more, continue reading this article and find out how to install your television.

The height of your TV

There is not an agreement in the medical group about what is the indicated altitude to install the television, because this will depend on the inches of the screen. However, it is noted that this should be, at least, between 85 to 100 centimeters from the ground, so that it is at the level where the eyes are when we are sitting (or lying down, if it is a bedroom). Putting it too high or too low is detrimental since the sight must deviate more than usual, increasing the chances of developing diseases to the retina or the cornea, and weakening, in general, the visual capacity.

A way to know if the position of your TV on the floor is correct is sitting straight in front of him and closing your eyes for a few moments. Search (with your eyes still closed) for your sight to be centered and then open them slowly, without moving them. If the center of your LED TV android is above or below that point, you may have to adjust it a bit.

Generally, the use of furniture as a TV closet, allows you to locate the artifact just at the recommended height so as not to damage your eyes. Also, you can have other decorative objects around, which will make your space look even more pleasant.

The distance between your TV

While this factor will depend on your visual acuity, it is essential to take some considerations. Your TV should be located at a distance where you can see details without straining your eyes Continue reading →

It’s Time To Install Your Air Conditioner

Intec Group 215 Comments

Now, it is possible that you have clear what type of air conditioning system you want for your home or your business; you have weighed the characteristics and chosen a model that suits all your needs, but perhaps you have not considered the development of a fundamental aspect: the installation.

You must bear in mind that it is essential that said installation be carried out by a specialist; this means that not only do you have to be in possession of the knowledge essential to carry out the task effectively, but you must also be able to prove a fluorinated gas handling certification.

In this way, it can be make sure that the person performing the installation is someone capable of carrying out the installation procedure correctly, resolving any problem that may arise, as well as providing valuable information and taking into account by users. Another critical aspect is that having an accreditation, it is guaranteed that the gas used in the installation is of total quality.

Another of the key aspects for which it is recommended to contact air conditioner best brands in India to carry out this and other processes related to air conditioning is sustainability. Installation carried out by an amateur or by someone who does not have the necessary experience can lead to errors such as gas leaks. It must be borne in mind that a large part of the uncontrolled emissions of gases into the atmosphere occurs in the domestic environment. Therefore, making sure that the installer is a specialist is suitable for both the user and the whole planet.

It is mandatory to issue a bill by the shop where the purchase of the air conditioning equipment has been made, according to whether the installation has been carried out by professional hands. This proof must be remitted even if this is not the first device installed; it is also necessary to certify that the process has been carried out in a controlled manner.

Beyond sticking strictly to the installation, the truth is that the presence of an accredited professional is required on many occasions. We will not only have him for the initial procedure, but we will also need him to carry out maintenance tasks or revisions (such as the one carried out before the summer season starts). If a user detects a fault or erroneous operation of his equipment, he should also contact the Official Technical Service; the handling of the refrigerant gas that operates the machine is a very delicate task that cannot be taken lightly.

In any case, you will not have problems to have the help of a professional; Intec has a pervasive official network from which you can quickly consult which are the nearest window air conditioner brand in India and, thus, be able to start enjoying your air conditioning system as soon as possible.

How To Choose A TV And Do Not Overpay

Intec Group 1 Comment

To understand modern TVs is not as difficult as it seems. In unfamiliar terms, it is easy to get confused, but almost always they denote relatively simple functions. The main thing is to find out what lies behind foreign words and abbreviations.

Often, marketers are trying to surprise buyers with the number of opportunities TV. Remember, the principle “the more, the better” does not work here – some of the new technologies may not be useful to you. This article will assist you to understand what to look for when buying a new TV and what the tricky terms mean.

Main characteristics

Dimensions

Usually, TV chooses in size. But not always a big screen is excellent. If the TV with a meter diagonal is cheap, most likely it has a lousy picture and limited functionality. Do not buy a cheap TV with a large diagonal. Check the image quality and additional features.

Many manufacturers believe that the screen size is the main thing. Therefore, they produce models with poor-quality matrixes and poor fillings to beat the competition due to the price.

Large TV is not suitable for small spaces. You, probably, noticed that it is impossible to see the large image close up entirely. Therefore, if you overdo it with the size, it will be hard to focus on the picture. You will have to strain your eyes, using peripheral vision- from this you will quickly get tired, instead of resting.

The general rule is as follows: the diagonal of the TV should be three times less than the area from the eyes to the screen. If you choose an ultra-high definition LED TV for particular furniture, such as a cabinet, table or shelf in the closet, do not be lazy to measure them with a tape measure and record the dimensions. Grab the tape measure in the store and check the dimensions are already there. Do not try to do it by eye- you can easily make a mistake by a couple of centimeters, because of which the TV does not fit in the right place.

Please note that not all large TVs are on one foot. Some of them have two, and they are located at the edges. Such a TV may not fit on too small a pedestal.

How to understand which is better: Full HD or 4K?

Full HD is a modern standard for television and Internet video. Almost all TV channels and streaming services show video in Full HD. With this TV you can fully enjoy current films and distinguish small details on the screen. But be prepared that in a few years the TV will become obsolete. Top LED TV brands in India told that Full HD will replace Ultra HD.

  • Ultra HD is the standard for the near future. It is four times sharper Full HD. But while he has his drawbacks:
  • Many TV channels still broadcast in low resolution – on a 4K TV, this picture looks terrible;
  • Ultra HD movies “weigh” a lot – with low Internet speeds, they cannot be watched online, only downloaded;

The minimum resolution for a 4K TV is Full HD. If you turn on the 720p movie, enjoy the picture will not work. Remember, until about 2010 no one shot movies in Full HD.

Over time, some of these problems will go away, but for now, you will have to endure. Although gradually providers of digital TV are moving to 4K.

How To Check The TV When Buying: Expert Advice?

Intec Group 5 Comments

It is difficult to imagine a family that does not have a TV in their home. This is almost a stylized “home,” which in the evenings brings the whole family for pleasant family leisure, such as watching a good movie or gambling on game consoles.

Televisions, as well as any equipment that is purchased not for one year, needs careful selection and verification of work. What should be foreseen before choosing a new TV model? How can we test the quality of the matrix?

To make a choice more obvious, today we will reveal the secrets of accurate testing of TVs and best LED TV brand in India.

Step 1. Checking packaging and picking

First of all, you should look at the box with the new TV. Ideally, it should not be mechanical damage, tears or dents. If they still have a place to be, this indicates that the TV was not delivered most accurately, and the inspection of the TV itself should be carried out very carefully.

Having opened a treasure box, we check all a complete set (the list of a full game, should be specified in the instruction) and we examine the TV itself. Are there any scratches, cracks or chips on the case? Are all protective films in place?

Then we check the correctness of filling in the documentation and warranty card. The latter should have the actual date of purchase, the warranty period (usually in months) and the seal. Few buyers pay due attention to the correct filling of the warranty certificate, errors in which can in rare cases lead to a denial of warranty service so that excessive vigilance does not hurt.

Step 2. Check for broken pixels

So, the TV is connected and fully ready for testing. But if the purchase of the TV occurs in the cold season, it is better to withstand it for a couple of hours at room temperature and only then turn it on and perform tests. Now we connect the flash drive (or another external drive), turn on the prepared images and carefully study the screen itself.

Step 3. Evaluating the uniformity of the backlight

When applying a uniform color image to the screen, ideally, the color should be uniform over the entire area, without pronounced gradients of third-party colors. But due to the peculiarities of the backlighting of the absolute “smoothness” of a single-color image, it is difficult to Continue reading →

How Far Do You Have To Put Your TV From The Sofa?

Intec Group 0 Comments

Diwali is coming, and many take the opportunity to renovate the TV in the dining room, but what kind of television and what is the right size for our living room? Previously, in the blog, we talked about how to choose the right size of the TV for your home and today we focus on the distance you have to put your TV on the sofa to enjoy the best image quality!

The importance of distance

Surely more than once you have heard that it is not convenient to get too close to the TV because it is not only bad for the eyes but causes us not to appreciate as we should the quality of the image.

For this reason, best LED TV brands in India review the factors that affect the image quality and explain, based on them, where to place the television in your home.

What factors to take into account to locate the television?

There are several factors that you must take into account to place the television in your home. Among them is the angle of vision, the threshold of standard pixelation, the resolution of the image, the size of the TV and the size of the place where we want to place the TV.

The standard pixelation threshold

When we have television very close to the sofa, you can see pixelation problems in the image. How to solve the pixilation effect? Very easy! Increasing the distance, you will obtain a better quality of image since the density of the pixels will increase, obtaining smoother images with all the luxury of details offered by high definition digital technology.

If what you are looking for are the best image quality and the best technology, we recommend you to discover the 4K Ultra HD TVs. That you already have available in a wide range of sizes that adapt to you.

What is the optimum distance to obtain the best image quality?

The visual acuity of each viewer will determine the optimal distance for him/her. However, as standard you can set a standard pixelization threshold of 1.5 times the diagonal distance of your television, that is, for every ten inches that our TV has, we will have to be separated half a meter from the screen.

Also, the ideal is to add a little more distance, to ensure the comfort of our view and take advantage of pixel density and resolution. But do not go far! Since then you will begin to lose specific details to the image, subtracting quality and definition from the image.

The resolution of the image

The best thing to visualize images with the highest quality is to imagine compatible images with the resolution that the television provides us. In the case of visualizing material with a maximum resolution, it will allow you to place yourself much closer to the screen to enjoy more detail and angle of vision.

Dimensions of space

Another factor, no less important that influences the image quality is the size of the place where we want to place the screen.

Full HD or 4K TVs have reduced viewing distances. Leaving aside the problems of space. What do the best LED TV manufacturer in India say? And the maximum distance is five times the width of the screen.

According to the inches- a minimum distance: for example, for a 50-inch TV, the minimum distance would be 2.25 meters from the ideal viewing position.

Air Conditioning With Children And Seniors: What You Should Know

Intec Group 0 Comments

Summers in India are usually very hot, with temperatures that can exceed 40º during the day. Children below three years old and people over 70 are the ones who suffer the most with heat waves, especially when they last for days.

Heat stroke can have severe consequences for the elderly and children, who may suffer from insomnia, skin irritation and discomfort when sleeping, which makes the nights seem endless.

“When there is a baby or an elderly person at home we often question whether the use of air conditioning is good or not”

To not affect your health, but do not give up the comfort of an air conditioner, monitor how you use it and follow these simple recommendations:

Opt for an air conditioner that also purifies the air

Heat and humidity are not the only foes. In spring, plants release pollen, affecting a quarter of the population with allergies and rhinitis. The bacteria and organisms that are in the air are another of the things that worry us when there are children at home.

“The bacteria and organisms that are in the air is another thing that worries us when there are children at home.”

We know that it is difficult not to lower it 20º at a time, but Intec air conditioners allow you to maintain a constant temperature and give you the comfort you need without the sensation of extreme cold when entering the room.

Air conditioner brands in India recommend that the temperature of the room oscillate between 21º and 25º C and try, as much as possible, to install other air conditioning systems in the rest of the house. In this way, when for example you pass the baby from one room to another, you will avoid having a thermal shock.

“It is important to avoid thermal shock.”

Remember, a big difference between indoor and outdoor temperature or even between rooms is not recommended for these people. It is good to have a uniform temperature in the house of 25º than to have two rooms at 21 degrees and the rest of the house at 30º.

Avoid a direct air flow

If you look at the control of your air conditioner, you will find a button that gives you the option Air swing.  This function helps you regulate the direction of the air flow so that it does not go directly to the face. With this mode, you ventilate the entire room evenly.

Monitor the humidity of the air

They say that air conditioning tends to dry the environment a lot, but what you may not know is that many air conditioning systems have an option that “humidifies the air.” This option is essential for these people at risk to have greater comfort when using the air conditioning.

Make proper maintenance of the air conditioning

When you have an air conditioner, it is essential that you clean the filters of the indoor unit before the arrival of summer, especially if there are newborns at home, or older people suffering from allergies or asthma. If your air is used only in cold mode, you should pay more attention to cleaning since it spends all winter off, so dust particles and mites accumulate

Install an air conditioner in all rooms

As we have mentioned before, having a newborn baby, children or seniors at home requires extraordinary measures. Buying Intec air conditioner for a single room in your house while the rest are at a higher temperature, can cause the individual to suffer from thermal shock

Air Conditioning System For Your Restaurant

Intec Group 150 Comments

Whether in winter or summer, offer your customers a pleasant temperature, the feeling of comfort, can be the difference that separates the fact that they are more time in the dining room, consume more, value the experience as positive and think about returning, or in case they have been uncomfortable, your establishment has lost customers.

And to get this temperature, air conditioning is essential. What kind of air conditioning is the most interesting for your restaurant?

FACTORS FOR THE CHOICE OF AIR CONDITIONING

The significant thing is that the less power consumption air conditioner integrates well in the space where you install it, that is, that satisfies your needs to refresh the room or any other room in your local.

A specialist can help you, calculating the so-called thermal load, which should have the air conditioner, and thus know the necessary factors. It is always better to be advised by professionals of air conditioning for public establishments.

How many air conditioners the hall of your restaurant needs? Depending on their size and distribution, so will be the customer flow. You should consider other aspects such as the number of windows, the average number of people in the room, the heat generating machinery that may exist, the size of the room, the access doors, the orientation to the sun, etc.

The EER coefficient is used to measure the relationship between the cooling capacity of the air conditioner and the necessary energy consumption. The higher the EER coefficient, the higher the performance will be.

THE RIGHT TEMPERATURE

In some cases, the opposite effect can occur, with air conditioning. That is to say, that it is so much the will to refresh the room where your guests are, so that they are comfortable, that in the end, they are uncomfortable because of the cold thermal sensation. Do not forget that the ideal temperature is between 21 and 23 degrees.

ADVICE FOR THE ELECTION

It is essential that the model of air conditioning you choose controls the temperature, but also other factors, such as programming the start-up and shutdown, automatically.

The formula by which the air conditioning is chosen thinking only of the square meters that the room has is not useful. Many factors can influence, especially the case of devices or machinery that emit a lot of heat. Think of a kitchen with the engines of refrigeration equipment, irons, ovens, fryers, coffee makers, etc.

As we have seen, energy consumption is a significant variable. Keep in mind that spending on energy and electricity can be one of the biggest, in considering the survival of your business.

For the maintenance of the equipment, it is essential to follow the split air conditioner manufacturers in India’s recommendations. In this way, it will have a longer useful life and will work efficiently, with minimum energy expenditure.

If you want a model of air conditioning with more modern features, you can always consider those that have remote connectivity through Wi-Fi, which is also ultra-quiet and purifies the air, among other things. And if after all this you still cannot decide, you can always contact a professional to advise you which one of them is the perfect air conditioning for your home

5 Questions To Ask Yourself To Complete An Air Conditioning Installation

Intec Group 0 Comments

The installation of an air conditioning makes it possible to regulate the temperatures within a dwelling. In times of high heat, it offers the opportunity to refresh the ambient atmosphere of each room, making it more comfortable. There are also models of reversible air conditioning, with a heating function for periods such as the winter season.

What are the various types of air conditioning?

There are two main types of Intec air conditioner, namely the classic air conditioner, and the reversible air conditioner:

A traditional air conditioning system uses a refrigerant to drive heat away from the surrounding air. The heat is expelled to the outside and fresh air obtained by cooling thanks to the cooling liquid is returned to the interior of the rooms of the house, improving the thermal comfort.

A reversible air conditioning is a type of air conditioner that incorporates a heating mode in its operation. This heating system air conditioning involves a heat pump air-air (reversible heat pump), that is to say, the calories of the outside air are captured by the camera, to return hot air inside the house.

What are the different ranges of the air conditioner?

An air conditioning installation can be done in several different forms:

  • Monobloc air conditioner: this model comes in a block, as its name suggests. The mono-bloc air conditioning contains the entire device in a single unit, which gives it relatively large dimensions.
  • Mono-split air conditioner: The split air conditioner consists of an indoor unit and an outdoor unit. It heats the ambient air of larger surfaces than the mono-bloc model.
  • Multi-split air conditioner: this model has more than two groups. Multi-split air conditioning is very useful for heating several rooms at a time with the same device.

The distinction between the wall-mounted air conditioner and mobile air conditioner: the installation of a fixed air conditioning is to be differentiated from the mobile model. We install a wall mounted air conditioner (fixed air conditioner) in height in order not to clutter the rooms, and the Continue reading →

How To Choose The Right Air Conditioner For House And Cottage?

Intec Group 0 Comments

The competent choice of the conditioner – a guarantee of your comfort during a hot season. Suddenly failing climatic equipment is a serious and sometimes expensive problem that can be avoided if you choose the right parameters, install correctly, perform timely maintenance and follow the rules of operation.

The choice of a cheap model of air conditioning is not always justified, since the cost of ownership for it may be higher than for a high-priced model. The modern market offers the consumer a vast variety of air conditioners. How to choose – the question is not the easiest, even within one brand it is straightforward to get confused. Where to start?

We select the conditioner depending on the room and the required power

For every room, the capacity of the air conditioner must be calculated separately. The power (cooling capacity) of the air conditioner is derived from data on the total control from all heat sources- such as lighting, direct sunlight, electrical equipment.

Private houses and cottages

For individual homes and cottages are applicable the same types of top air conditioner brands in India as for multi-room apartments. The difference is only in the parameters of the premises- may require more power. It can also be recommended for installation in a private house or cottage cassette split system, which is ideal for rooms with false ceilings. In some installations, it can successfully replace one of the ceiling panels. From the cassette distribution of cooled air goes in four directions.

What to find when selecting an air conditioner

Having decided on the type of air conditioner that you are going to install, you can go to the full selection.

Pay attention to the following parameters:

  • Company manufacturer. Of course, it is better to choose a company with a name, but you should not chase fashion brands. It is better to choose not from the top three, but from the top ten.
  • The convenience of service. Be sure to find out how often the air conditioner filters should be cleaned and changed, whether condensate should be drained. If you install the air conditioner with the help of industrial climbers, maintenance and repair will likely also require their participation.
  • Cost of ownership. Evaluation of this parameter often leads to the choice of a more expensive air conditioner, since taking into account installation, maintenance, the need for repairs, energy consumption and the service life, it costs less to own. If you are faced with a psychological barrier to the cost of buying an air conditioner, estimate the cost of ownership.
  • Additional functions. Modern air conditioning, as a rule, multifunctional. Heating of the room, ionization, and air purification work in sleep mode, special control functions – all this can make your stay in the room more comfortable for you or get noticed only about the air conditioner price.

Many functions in practice may not be useful to you, so it is worth realistically assessing their necessity. Of course, the small air conditioner guide of air conditioner manufacturer companies in India is just a collection of primary landmarks. Having assimilated this information, you will be able to understand better what you are being asked about in the store, and, in turn, ask the right questions.

Tips For Properly Setting Up Your Tv

Intec Group 239 Comments

To begin with, that there is a “right adjustment.” If you were at the electronics store at least once, you probably noticed that all the TVs on display show differently. What is the reason for this? Which one is better? Let’s figure it out.

We think you will agree that the TV should not just show a picture, but also make as little distortion as possible to the original content. The content itself is always created with an eye on the standards and LED TV manufacturing companies in India’s recommendations, and the primary goal of any TV is to convey to you precisely the image that you wanted to show. Everything is essential here: both the skin tone of the actor, and the color of the sky at sunset, and what details of the image should be visible and which are hidden. There are international standards that describe what should be the image on the screen of your TV.

Unfortunately, modern TV manufacturers set up their products frankly wrong, because they are not interested in seeing their displays meet the existing color standards, but in increasing sales of these same displays. To sell more TVs, manufacturers are always trying to present more “bright blue” and “live red” colors than their competitors.

They specifically enhance the brightness of some colors, so that the products look more seductive on store shelves than those of other firms. On the shelves with externally identical products, the buyer will choose the brightest TV or the one whose colors seem “deeper.” If manufacturers paid enough attention to the correct tuning of their products, then all the TVs displayed on the counter would show a very similar image.

The only sure way to get the right image on the TV screen is hardware calibration. It consists in the fact that standard models are fed to the TV’s input, and measurements are taken from the screen. Next, the TV settings are adjusted until the image parameters are as close to those required by the standard. But this setting is rather laborious, requires knowledge, and, first of all, equipment.

Which image mode to choose (standard/ dynamic/movie)?

On the vast majority of TVs, the correct mode is the Movie / Cinema mode. Do not use the “Dynamic” method for viewing: because of the non-linear gamma, the image in it is always wrong, and because of the greatly over-emphasized brightness, this mode strains the eyes, especially if you watch TV in dim lighting or darkness.

What color temperature mode should I choose (cold/ standard/warm)?

On the vast majority of TVs, the warmest mode is the closest to the standard color temperature (6500K). If you have a Warm1 / Warm2 option, determine which one is the best. Usually, it’s Warm 2, but there can be exceptions.

What settings are recommended to be turned off for the best picture?

It is necessary to disable all settings that adjust the brightness/contrast to the discretion of the TV. That is, it is required to disable “dynamic contrast,” “energy saving mode,” “light sensor,” “dynamic illumination” and do not use “Dynamic” image mode.

How to set the “contrast” parameter correctly?

This parameter is incorrectly called “contrast,” since the contrast is the ratio of the maximum brightness of the white field (white level) to the black level (the minimum luminance level of the panel). So, the “contrast” parameter in the ultra-high definition LED TV menu changes the level of white, that is, the level of the maximum brightness of the image.